Cam Follower Bearings

Our precision cam follower and yoke roller bearings consistently exceed expectations in performance and cost. 

Share This Page

Our range of precision bearing cam followers and yoke rollers offers greater range, specification, and size flexibility, allowing you to design with freedom without the limitations presented by alternative brands.
The UNASIS quality management system is accredited to ISO 9001:2015 standards while we work to achieve AS9100, and every single cam follower and yoke roller had to pass stringent quality-control checks, so you can be confident that every single one of our products is quality-assured.

More About...

Grease Nipple and Hex-Port Lubrication

Interchangeable Solutions

UNASIS Bearings

By incorporating grease nipples in the head and stud, there is no protrusion or obstruction whilst the bearing is in application, allowing for vast space saving in the designs. 


All Hex-Port lubrication grease nipples come pre-installed in UNASIS cam-followers to save time, although an additional plug and nipple are supplied to increase adaptability for various applications.


 With lubrication allowed through the hex head, the need for stock slot head and unsealed cam followers are bypassed, allowing our customers to reduce their inventory (and therefore expenses).

UNASIS cam followers are completely interchangeable with familiar brand sizes, meaning that all your top-specification cam or yoke rollers can come from a single brand with all necessary features.


From printing and canning, to packaging and construction equipment, our cam followers and yoke rollers are designed for use in a diverse range of applications.


Hex-Port lubrication features come as standard on selected cam followers, and sizes begin at 13mm.

From indexing boxes and cam locking systems to manipulators, over the years we have successfully designed, manufactured, and supplied cam followers for a number of applications, all bespoke to our customers’ requirements.


 In addition to our available standard and non-standard sizings, we can also reverse-engineer existing bearings and develop a new and improved variation specifically for your application.


Unlike many manufacturers, our range of metric cam followers allow lubrication through two ports in the head of the stud on hex drive types. This allows for easier re-lubrication once the bearing is mounted.

Cam Followers

Stainless Steel Cam Followers

Yoke Rollers

Stainless Steel Yoke Rollers


UNASIS Bearings has a vast network of distributors to reach all corners of the globe. No matter where you are, you will get the best service to go along with the best bearings.

Contact Us Today

For more information, please call us today on +44 (0) 1235 527 770 or email [email protected]

First Name*


Last Name*


Email Address*








I would like to receive marketing from UNASIS via: