Our UNASIS Breakaway Torque Wrench Tool can be utilised with various housing arrangements for v-groove or chamfered bearings. The tool provided is designed to align with the diameter of the bearing. Therefore, a breakaway wrench tool can measure the torque of a variety of bearings. The design of the tool makes sure that it is not possible to damage the bearing, as the interference fit is used to lock the bearing in place rather than more destructive forces. Moreover, the UNASIS breakaway torque wrench fits effortlessly on the breakaway torque tool, initiates the rotation of the bearing, and creates a precise reading of the breakaway torque or peak value.
Some common wrench sizes include:
- IPBT-WRENCH-0.5N-m
- Digital Torque Reader Calibrated 0.002 - 0.5 N-m (0.020 - 4.5 lb-in)
- IPBT-WRENCH-0.5N
- Digital Torque Reader Calibrated 0.05 - 0.5N-m (0.45 - 4.50 lb-in)
- IPBT-WRENCH-4N
- Digital Torque Reader Calibrated 0.4 – 4 N-m (3.5 - 35 lb-in)
- IPBT-WRENCH-4N-R
- Digital Torque Reader Calibrated 0.02 – 4 N-m (0.2 - 35 lb-in), Right Angled, 1/4 inch drive
- IPBT-WRENCH-30N
- Digital Torque Reader Calibrated 1.5 - 30 N-m (13.3 - 265.52 lb-in)
-
Other calibration ranges are available on request.