IMCH

Share This Page

All of our cam follower and yoke roller bearings are designed, developed, and manufactured to the highest possible quality, and offer an economic solution to industry-standard principle dimensions. This makes them both readily available, and interchangeable with design improvements, meaning you can enjoy enhanced performance over an extended operating life.

 

Our IMCH range comes equipped with a full complement needle arrangement as well as heavy-duty cylindrical rollers for added load capacity. For more information, please review the product table below and discover the ideal bearing for your application. For tailored support, please reach out to our expert team of bearing engineers today.

Product Details

Size Sealed Bearing Part Number  A - Roller OD B - Roller Width C - Stud Dia. D - Stud Length E - Thread Length F - Thread Class G - Oil Hole Centre H - Oil Hole Dia. J - Lube   Fitting Size
mm   mm mm mm mm mm   mm mm  
35 IMCH-35-SB 35 18 16 32.5 17 M16X1.5 8 3 6
40 IMCH-40-SB 40 20 18 36.5 19 M18X1.5 8 3 6
47 IMCH-47-SB 47 24 20 40.5 21 M20X1.5 9 4 8
52 IMCH-52-SB 52 24 20 40.5 21 M20X1.5 9 4 8
62 IMCH-62-SB 62 29 24 49.5 25 M24X1.5 11 4 8
72 IMCH-72-SB 72 29 24 49.5 25 M24X1.5 11 4 8
80 IMCH-80-SB 80 35 30 63 32 M30X1.5 15 4 8
90 IMCH-90-SB 90 35 30 63 32 M30X1.5 15 4 8

*The standard UNASIS metric cam-follower comes with hexagonal head with hex-port, seals and crowned outer roller diameter.                                        
*Cylindrical roller surface is available, include and "X" suffix in the part number e.g. IMCH-62-X, IMCH-62-SX, IMCH-62-SBX, please refer to the part numbering section.

 

Size Sealed Bearing Part Number  Corner  Radius Clamping Torque Max Speed -Grease Speed - Oil Dynamic Load Rating Static Load Rating Mass
mm   mm Nm rpm rpm N N kg
35 IMCH-35-SB 0.6 57 6500 8500 23000 27000 0.165
40 IMCH-40-SB 1 85 5500 7200 25000 31000 0.242
47 IMCH-47-SB 1 118 4200 5500 38000 48000 0.38
52 IMCH-52-SB 1 118 3400 4400 42000 57000 0.45
62 IMCH-62-SB 1 216 2600 3400 58000 76000 0.795
72 IMCH-72-SB 1.1 216 2100 2700 64000 8900 1.01
80 IMCH-80-SB 1.1 441 1800 2300 94000 129000 1.54
90 IMCH-90-SB 1.1 441 1800 2300 94000 129000 1.96

*Limiting Speeds shown in the table above should be used as a guideline only as each individual application and load scenario will vary. The figures given assume bearings operating within optimal conditions only.                                      
*Clamping torque is based on dry threads only. If the threads are lubricated, use half the values shown.                                    
 

 

 

FIND A DISTRIBUTOR

UNASIS Bearings has a vast network of distributors to reach all corners of the globe. No matter where you are, you will get the best service to go along with the best bearings.

Contact Us Today

For more information, please call us today on +44 (0) 1235 527 770 or email [email protected]

First Name*

 

Last Name*

 

Email Address*

 

Telephone

Company

 

Territory*

 

Message*

 
I would like to receive marketing from UNASIS via: