Contact us Today
Home Bearings Tools Manufacturing Services About Quality Industries News Contact
Home     >     Bearings     >     Cam Follower Bearings     >     Imcre

Title

Tri-Roller Swaging Tools

Drill Press Tri-Roller Swaging Tool Portable Tri-Roller Swaging Tool

Bearing Cutting Tools

Drill Press Cutting Tool Portable Cutting Tool Specialist Cutting Tools

Proof Load Test Tool

Portable Proof Load Kit Anvil Proof Load Tool

Torque Test Tool

Portable Breakaway Torque Kit Swivel Torque Tool

Custom Aerospace Bearing Tools And Cases

Engine Mount Bearing Tools Custom Aerospace Bearing Tools

Aerospace Bearing Heaters

Aerospace Bearings Heaters

Bearing Install/Remove Tools

Install/Remove Tool

Sleeve Swaging Tools

Flat Roller Swaging Tool U-Roller Swaging Tool

Staking Tools

Anvil Staking Tool Point Staking Tool Line Staking Tool

Two-Wheel Swaging Tool

Two-Wheel Swaging Tool

Housing Swaging Tools

Ball Roller Swaging Tool Reverse Tri-Roller Swaging Tool

IMCRE

Share This Page

All of our cam follower and yoke roller bearings are designed, developed, and manufactured to the highest possible quality, and offer an economic solution to industry-standard principle dimensions. This makes them both readily available, and interchangeable with design improvements, meaning you can enjoy enhanced performance over an extended operating life.

 

Our IMCRE range comes equipped with a cage that evenly spaces the needles during operation and an eccentric collar which allows for easier and more accurate positioning. For more information, please review the product table below and discover the ideal bearing for your application. For tailored support, please reach out to our expert team of bearing engineers today.

Product Details

Size Sealed Bearing Part Number  A - Roller OD B - Roller Width C - Stud Dia. D - Stud Length E - Thread Length F - Thread Class G - Oil Hole Centre H - Oil Hole Dia. J - Lube   Fitting Size
mm   mm mm mm mm mm   mm mm  
16 IMCRE-16-SB 16 11 7 9 16 9 M6X1 - 0.6
19 IMCRE-19-SB 19 11 9 11 20 11 M8X1.25 - 0.6
22 IMCRE-22-SB 22 12 10 13 23 12 M10X1 - 0.6
26 IMCRE-26-SB 26 12 10 13 23 12 M10X1 - 0.6
30 IMCRE-30-SB 30 14 11 15 25 14 M12X1.5 3 0.6
32 IMCRE-32-SB 32 14 11 15 25 14 M12X1.5 3 0.6
35 IMCRE-35-SB 35 18 14 20 32.5 18 M16X1.5 3 0.8
40 IMCRE-40-SB 40 20 16 22 36.5 19 M18X1.5 3 0.8
47 IMCRE-47-SB 47 24 18 24 40.5 21 M20X1.5 4 0.8
52 IMCRE-52-SB 52 24 18 24 40.5 21 M20X1.5 4 0.8
62 IMCRE-62-SB 62 29 22 28 49.5 25 M24X1.5 4 0.8
72 IMCRE-72-SB 72 29 22 28 49.5 25 M24X1.5 4 0.8
80 IMCRE-80-SB 80 35 29 35 63 32 M30X1.5 4 1
85 IMCRE-85-SB 85 35 29 35 63 32 M30X1.5 4 1
90 IMCRE-90-SB 90 35 29 35 63 32 M30X1.5 4 1

*The standard UNASIS metric cam-follower comes with hexagonal head with hex-port, seals and crowned outer roller diameter.                                        
*Cylindrical roller surface is available, include and "X" suffix in the part number e.g. IMCRE-62-X, IMCRE-62-SX, IMCRE-62-SBX, please refer to the part numbering section.                                        
 

Size Sealed Bearing Part Number  Corner  Radius Clamping Dia. Min Clamping Torque Max Speed -Grease Speed - Oil Dynamic Load Rating Static Load Rating Mass
mm   mm mm Nm rpm rpm N N kg
16 IMCRE-16-SB 0.3 11 3 19500 25000 4120 4120 0.018
19 IMCRE-19-SB 0.3 13 8 15500 20000 4510 5000 0.028
22 IMCRE-22-SB 0.5 15 15 13500 17500 6280 7260 0.043
26 IMCRE-26-SB 0.5 15 15 13500 17500 6280 7260 0.055
30 IMCRE-30-SB 1 19 22 9600 12500 8240 9710 0.087
32 IMCRE-32-SB 1 19 22 9600 12500 8240 9710 0.096
35 IMCRE-35-SB 1 24 57 6300 8000 13040 19030 0.166
40 IMCRE-40-SB 6 27 85 5000 6400 15990 23730 0.245
47 IMCRE-47-SB 8 30 118 3900 5000 21280 35700 0.387
52 IMCRE-52-SB 8 30 118 3900 5000 21280 35700 0.453
62 IMCRE-62-SB 8 38 216 3100 4100 31680 55700 0.801
72 IMCRE-72-SB 8 38 216 3100 4100 31680 55700 1.039
80 IMCRE-80-SB 8 51 441 2200 2900 56000 105030 1.621
85 IMCRE-85-SB 8 51 441 2200 2900 56000 105030 1.793
90 IMCRE-90-SB 8 51 441 2200 2900 56000 105030 1.981

*Limiting Speeds shown in the table above should be used as a guideline only as each individual application and load scenario will vary. The figures given assume bearings operating within optimal conditions only.                                      
*Clamping torque is based on dry threads only. If the threads are lubricated, use half the values shown.                                    
 

FIND A DISTRIBUTOR

UNASIS Bearings has a vast network of distributors to reach all corners of the globe. No matter where you are, you will get the best service to go along with the best bearings.

DISTRIBUTORS

Contact Us Today

For more information, please call us today on +44 (0) 1235 527 770 or email [email protected]

First Name*

Last Name*

Email Address*

Telephone

Company

Territory*

Message*

I would like to receive marketing from UNASIS via:
Submit Enquiry