Metric Cam Follower Lubrication

Share This Page

One thing that sets UNASIS’ Metric Cam Followers apart from other manufacturers is that our followers can be lubricated through 2 separate ports: both the bead and the stud on hex drive types. This makes bearing relubrication a much easier process once it is mounted in application compared to standard followers.


The grease nipple is found in both the head and stud, creating no obstructions or protrusions whilst in application, and allowing for significant space savings.


These hex-port lubrication grease nipples are arrive pre-installed in our Metric Cam Followers, saving you time. An additional plug and grease nipple are also supplied for easier access in the future depending on the needs of your unique application. This allows our customers to reduce their inventory by allowing lubrication through the hex head, which surpasses the need for unsealed cam followers or socking slot heads.


Our bespoke UNASIS Metric Cam Follower are interchangeable with many well-known brand sizes, meaning we can provide you with top-specification cam followers or yoke rollers with all required features from a single brand. You can find a full copy of part number substitutions in our catalogue.


Beginning at 13mm, the hex-port lubrication is standard in selected cam followers. For queries or special requirements, please get in touch with our team today.


This information specifically refers to our UNASIS Metric Cam Follower range.


UNASIS Bearings has a vast network of distributors to reach all corners of the globe. No matter where you are, you will get the best service to go along with the best bearings.

Contact Us Today

For more information, please call us today on +44 (0) 1235 527 770 or email [email protected]

First Name*


Last Name*


Email Address*








I would like to receive marketing from UNASIS via: